Products DHTML Menu

Eagle X Xtended Life Combustion Analyzer Kit w/ NO1 C157KIT

Product Functions

  • Measures:

Differential flue temperature,
Carbon Dioxide (CO2),
flue & ambient carbon monoxide (CO),
Differential Pressure,
Nitric Oxide (NO1)

  • Calculates:

Oxygen,
efficiency,
Excess air,
CO air free

  • Worklight
  • 4 line backlit LCD display
  • 179 memory positions
  • User customizable parameters view
  • Individual report printouts
  • Unique DMM style rotary selector
  • Protective boot w/integral magnet
  • Real time clock
  • CO readings to 1 ppm
  • Infrared printer port
  • 5 year limited warranty (5 year warranty on sensor)
  • WARNING: Cancer – www.P65Warnings.ca.gov

Product Includes

  • Combustion Analyzer (C157)
  • Infrared Thermal Printer (IRP-2)
  • Flue Probe (KMCP2)
  • K-Type Temperature Probes 2(ATT29)
  • Static Pressure Hoses 2(SPP)
  • True Draft Probe (TDP)
  • Gas Pressure Probe (GPP)
  • AC Adapter (AACA4)
  • Hard Carrying Case (AC509)
  • Thermal printer paper roll (16646)
  • Particle Filter (17631)
  • Inlet Tube/Probe Connecter (SM11103)
  • Owners Manual
  • Quick Start Guide

Additional Resources

EOS Technology

Optional Accessories

Descripiton Product ID
Thermal Paper16646
Thermal Paper16646PACK
Particle Filter17631PACK
Hard Carrying CaseAC509
Static Pressure ProbeASP1
K-Type Liquid Temperature ProbeATT100
K-Type Temperature ProbeATT29
K-Type Pipe Clamp AdapterATTPC
K-Type Pipe Clamp AdapterATTPC2
Gas Valve Pressure AdapterBF100
Water Trap Drain PlugCM11667/2
Draft Velocity GaugeD460
Flue ProbeKMCP2
Infrared Thermal PrinterKMIRP2 - discontinued
Inlet Tube Probe ConnectorSM11103
Water TrapSM11827
Smoke Pump Test KitSPT1
A/C AdapterAACA4

Related Meters

DescripitonProduct ID
Xtended Life Combustion Analyzer Oil Service Kit w/ NO1C157OILKIT
Xtended Life Combustion Analyzer KitC155KIT
Industrial Analyzer - DISCONTINUEDKM940
Quintox: 5 Gas Industrial Analyzer - DISCONTINUEDKM9106/P
Combustion Check Meter - DISCONTINUEDSMART BELL
Carbon Monoxide DetectorCO71A
Carbon Monoxide Meter - DISCONTINUED replaced with CO95CO91
Combustible Gas Leak DetectorCD100A
Dual Input Differential Manometer - DISCONTINUED see EM201BEM201

Cost of Ownership

EAGLE 3X Xtended Life Combustion & System Analyzer
The newly redesigned Eagle 3X Combustion System Analyzer eliminates the number one hassle for combustion contractors; the annual replacement and calibration of the O2 sensor. By replacing the electro chemical O2 sensor with the EOS Technology™ CO2 sensor, the EAGLE 3X now takes direct CO2 measurements and calculates the O2 level. This lowers the cost of ownership by doing away with the annual replacements of the O2 sensor and reducing calibration drifting typically found with standard electro-chemical sensors. The EOS Technology sensor is warranted for 5 years and has an unmatched industry-leading life expectancy of 10 years!

Drivers & Software

DescripitonDownload
Eagle Bluetooth Software Download
Android Printer Software Download

Product Videos

Product FAQs

How often do I need to send my analyzer in for repair?
UEi recommends annual calibration for flue gas analyzers.
How do I use this analyzer?
UEi includes typical test locations and target values as a general guide, but recommends consulting with equipment manufacturers for exact guidelines. We also have available a demonstration DVD that shows the Eagle/EagleX series in use on a variety of equipment. Some of the tests from this video are posted on You Tube.
How long do the sensors last?
This varies by model. Our newer models use IR based sensors with an expected life of 10 years or more. The CO sensors in these newer units have an expected 5 year life. Our traditional electrochemical sensor based analyzers have a one-year warranty on the sensors, with an expected life span of two years.
How do I send the analyzer in for repair?
UEi uses UPS, but accepts shipments from US Mail, Fed Ex, UPS and others. Please contact UEi to receive a return tracking number or complete the online request from our web site. We will provide instructions and an estimated cost based on the information you provide.
Can I store my combustion analyzer in my service vehicle?
UEi recommends storing in a moderate temperature between 32~100F. If the temperature is expected to drop significantly below freezing or excessivly high it is recommended that the unit be brought inside.
How often do I need to change the particle filter?
Particle filters need to be changed based on use and the type of fuel. Natural gas burns very clean and will not block the filter fast, while heavy oil and solid fuels will require more frequent changes. Most of our filters will plug from the inside core out, and must be inspected to determine if they need changing. If the inner surface is black from soot it needs to be changed.
Why is my analyzer not showing a value for CO2 (or O2 on EOS based analyzers)?
Check the water trap drain plug to veify it is place. Also test the pump flow by briefly blocking the tip of the flue probe or blocking the inlet on the water trap. When blocked you should be able to hear the pump speed change and feel suction from the pump.
How do I test the temperature function on my analyzer?
If you have a second thermometer and water you can compare readings. Connect only the thermocouple connection from the probe, and submerse the tip of your probe in the water. Submerge the second thermometer and then compare readings between that thermometer and the gas analyzer. If the readings are off by 4 degrees or more please return to UEi for calibration. Small variances in flue temperature readings will have very little impact to calculated values of efficiency.
How can I test to determine if my CO sensor is responding?
Note - Do not test with automotive tailpipe exhaust. To perform a quick check of the CO use a paper or wood match or small piece of paper. Light the match or paper then extiguish it. Allow the analyzer to draw the smoke into the probe or bottom of the water trap. This should give you a reading of 50~100 ppm if you are able to draw in sufficient smoke. It should then return to zero within 3~5 minutes.
What are symptoms that my CO sensor is not functioning correct?
If the meter does not indicate any CO in the flue, or the readings are unstable. Do not test in auto or vehicle tailpipes.
The connection between the probe and water trap on my analyzer is broken. What is the part number?
The connector is part number is SM11103.
Why won't my analyzer turn off?
UEi analyzers will not power down unless CO is less than 20 ppm, and O2 is above 18% to protect the sensors. Contiue to purge the instrument in fresh air until readings return to near normal zero state (0 ppm for CO, 20.9 for O2). If you have a failed sensor it may prevent the analyzer from shutting down. Please contact UEi to arrange for service.
What is the upper limit for CO on my analyzer?
These models have an upper limit of 2000 ppm. It is not recommended to exceed this level, or operate at an extended time at this level. If the measured values are increasing quickly toward this limit, remove the probe from the flue and make appropriate repairs to the system before testing again. CO levels above 1000 ppm typically indicate that something is out of adjustment.
Can I use my C155 to measure flue draft?
Yes, the C125, C127, C155, and C157 can all be used to measure draft in flues. The Kit version of these include a flue draft probe to improve the reading.
Where can I get the tubing and brass accessories?
The support parts are availabe as a kit that includes the tubing, brass fittings, draft probe, and two k-type thermocouples. Please contact Customer Service for availability and part numbers. You can also search our Accessory part finder here by entering the type of part you are looking for or type of products it works with. ie: combustion or particle filter.